Suzhou Bozhen,苏州博振,热流道温度控制器,热流道温度控制王,温度控制器,温度控制仪,温控仪,emtc,mould temperature controller

eMTC-11/12 aptitude hot runner system mould temperature controller spec
1.aptitude control arithmetic, get the best combination of dynamic and stability
2.control software design modularily, defined the interface by customer
3.humanly display and interface, parameter setted conveniently
4.large LED display window, 8 router and temperature station display together
5.temperature control precision and stability highly
6.soft start defined freely, protect all type hot parts
7.integration design highly, performance stabilizationly, anti-jamming strongly
8.smaller solidity, only half than other products
9. carry quickly, put on the top of machines freely
10.maintenance expediently, repaired together because eight router made in one unit
11.controller king solidity size:
interface size:208*85*13mm(width*high*thickness)
back case size:188*63*144mm(width*high*thickness)
-------------------------------------------------------------

controller king case series spec:
1.one case of eight router stand size: 320*135*260mm(width*high*thickness)
2. one case of two units stand size:320*270*260mm(width*high*thickness)
3.to meet customer's need,change the case size
4.inside eight relay, select double cooler technology to assure relay work normally
5.output connect ports standly,plug and play at customer factory
--------------------------------------------------------------

Temperature control spec: If temperature setted, controller go to normal hot temperature after soft start.After temperature go to special range, the controller will change the control funtion, the temperature curve shows like picture No.1. It's not temperature over and the temperature stadily shortly from the picture.
When the system becomes steady, the controller will go to state control mode, the controller will control the wave of temperature in the range of ±1℃. Pay attention to the picture.
the controller king series back connect panel: the function of the controller connected solid-state relay directly
the controller king series back connect panel: the function of the controller connected commutator CSR

eMTC-11/12 hot runner system mould temperature controller king series is the main of prefossional machine of hot runner system, the main customers are the making mould factory or plastic factory. As the controller of eight router in one unit, it can be used filled in one router combinated. If the controller number is over four routers,selecting the eMTC-11/12 controller is good idea, it will be less cost, repaired conveniently and less used space.